The All New R60 Bar
Versatile. Compact. Powerful.
With innovative resistor technology is the first of its kind and is sure to impress by offering increased performance and added flexibility. The newly patented AC discharging bar with a freestanding air-supported spring tip achieves a very high passive discharge effect, which enables active operation even at a low level of high voltage AC. A small amount of air can be blown through the hollow spring tip to increase the range and to continuously clean the emission tips.
The bar's aluminum profile is equipped with a highly insulating, mechanically robust layer that, in combination with the freestanding spring tip, causes a significant increase in ion production. The new R60 Eltex bar features excellent discharging results at low and maximum speeds. The special feature here is that the discharge performance remains constant from short distances up to large ranges. It is exactly this wide-ranging performance that characterizes the R60 as the only discharging bar in the world that can be used in different geometric situations – even in narrow, grounded machine environments.
- flexible, freestanding emission tips with new resistor technology
- integrated air duct with R60L wear-protected emission tips
- excellent discharge performance at close and wide range
- high range at the lowest possible level of high operating voltage
- increased ion production using the same voltage
- versatile use in narrow and grounded machine environments
R50 & R51
R50 – Discharging Bar with fixed connection
R51 – Discharging Bar with plug-type connection
The Eltex R50 static discharge bar is the most powerful static elimination electrode in the Eltex range.
With an emission pin spacing of 15mm, the R50 provides ultimate discharge range, enhanced depth effect, high active discharge power through isolated ground conductors and high safety standards through passive discharging power with deactivated power supplies.
The R50 has an integral mounting channel with slide nuts (M5) which gives an unmatched degree of mounting options.
As with all Eltex static discharge equipment, the R50 is designed to prevent electric shocks through contact with the electrode points.
It can also offer enhanced safety through function and malfunction monitoring when coupled with the appropriate power supply.
The R50 can be supplied with either axial or radial HV cable connection (radial connection rotatable by 360°), a maximum active length 3,915 mm and an operating voltage of either 5 or 8kV.
The R51 version has a detachable high voltage cable, but is restricted to an operating voltage of 5kV.
Air Channel L50 as support of R50/R51 discharging bars
Air channel for surface cleaning support, axial, radial or side access air connection, max. length 3,990 mm, air outlet nozzles 90° or 28°.
EXR5C Discharging Bar for Atex classified areas
The EXR5C static elimination electrode offers the same advantages as the R50 bar detailed above, but has approval for use in EX zones according to BAS98ATEX2179X.
The EXR5C also offers enhanced safety through function and malfunction monitoring and machine control in conjunction with its ES53 power supply.
As with the R50, the EXR5C has an integral mounting channel with slide nuts (M5) which gives an unmatched degree of mounting options, is designed to prevent electric shocks through contact with the electrode points and has a 15mm emission point spacing for ultimate discharging effect in an Ex approved bar.
R45 Low Profile Discharging Bar until max. 6 kV at 1600 mm active length
The R45 is a low profile static elimination electrode which uses resistive coupling with a pin spacing of 20mm for excellent discharge range and hence enhanced depth effect and high active discharge power through isolated ground conductors.
High safety standards are achieved through passive discharging power with deactivated power supplies and can be enhanced by optional function and malfunction monitoring in connection with the appropriate power supply.
The “D” shape of the R45 offers extremely flexible installation options, whilst the resistive coupling ensures that no electric shocks are experiences due to inadvertent contact with the discharging tips
The R45 is available with a fixed, axial HV cable attachment , a maximum active length of 1600mm and an operating voltage 6 kV AC.
R44LS – Discharging Bar with rear air channel
R44LS is a single-row discharging bar with an integrated air channel which supplies air through the discharge bar between the emission pins.
The R44LS is available with a fixed, axial HV cable connection and a maximum active length of 1,995 mm.